Fitting and flanges
Sandvik Coupling-L




The
SANDVIK Coupling - L is specially designed to be used in difficult environments with little space, where a short mounting time and less weight is needed than with a traditional Flange-connection.

Contact your local SANDVIK office for further details.

Weight
  • The Coupling weights only a fraction of a corresponding joint
  • Reduces the total weight of the installation
  • aa
    a
    Space
  • Requires much less space than a conventional flange connection
  • Easy to thermally isolate the piping system
  • Can be installed into very awkward and restricted areas






  • aaaa
    Safety
  • The internal pressure is carried by the special clamps, supported by the bolts and nuts
  • Application and pressure tests certified by Tüv
  • Corrosion resistance thanks to flanges in
  • 316L with min. 2,5% molybdenum
  • aa

    a
    Time
  • The SANDVIK Coupling - L is installed much quicker than an ordinary Flange joint (only 2 bolts and nuts)
  • Bolts can be positioned in the direction of the line, easily accessible, even when walls or other surfaces are close to the pipeline


  • aa
    Complete Concept
    Only one purchase order for a complet unit (containing FCL-flanges, clamps, gasket, bolts and nuts
  • The SANDVIK Coupling - L is a fully TüV approved tube connection ( flanges, clamps, bolts and nuts)
  • Stock range from 3/4" - SCH10S to 8" - SCH10S, 26,9 x 2,3mm to 255,0 x 2,5mm
  • Each part of the Coupling - L is available as spare part (Flanges, Clamps, Bolts, Nuts, Gaskets in Nitrl, Viton and Teflon, Locking Rings)
  • aa
    aa
    a

    aa
    Applications
    aa
    - Pulp and paper industry
    - Water treatment plants
    - Paint manufacturing
    - Chemical plant
    - Sprinkler systems
    - Fire fighting systems
    - Food industry
    - Breweries
    - Hydraulic systems
    - Fuel and oil transfer lines on vessel
    - Fresh seawater cooling
    - Desalination plants
    aa
    a
    Download Catalogue:aa

    8 Coupling L.pdf




    aa

    ©AB Sandvik Materials Technology
    Legal Notice | Privacy Policy |Contact Us | Latest update:07/01/2004